Honeywell MPA2C3 - Page 20

20 MPA2C3 User Manual
c. Identify your local Ethernet connection (commonly labeled Local Area
Connection), and right-click the icon to display the Local Area Connection
Properties screen.
d. Highlight the Internet Protocol (TCP/IP) connection.
e. Click Properties to display your system’s current Internet Protocol
properties.
Tip: Keep a record of your computer’s current network configuration as it appears in this screen.
You will need to re-instate this configuration later.Select Use the following IP address.
f. Enter
192.168.1.10 in the IP address field.