HP 8114A - Page 144

EIP 8114A Service Guide
-222
-222
-222
-222
-222
-222
-222
-222
Data out of range
HP-IB message = “[param] out, of absolute limits”
Local message = “[param] out of absolute limits”
Description:
[param] = parameter name
This error is issued when a parameter is outside its
absolute limits.
Data out of range
HP-IB message = “[param] on channel [than] out of
hard limits”
Local message = “[param] on channel [than] out of
hard limits”
Description:
[param] = parameter name, [than] = channel number
This error is issued when a parameter is outside its
hardware limits.
Data out of range
HP-IB message = “[lot] Wrong Location Nr. -
allowed [lot range]”
Local message = “[lot] Wrong Location Nr. - [lot
range] ”
Description:
[lot] = location number, [lot range] = location range
Data out of range
HP-IB message = “BURSTXNT-RANGE”
Local message = “BURST of: 2 to 65536”
Data out of range
HP-IB message = “PERIOD-RANGE”
Local message = “Per: 66.7 ns to 999 ms (999 s
with PLL)”
Data out of range
HP-IB message = “DELAY-RANGE”
Local message = “Delay: 0.0 ns to 999 ms”
Data out of range
HP-IB message = “DOUBLE-RANGE”
Local message = “DoubleDelay: 20.0 ns to 999 ms”
Data out of range
HP-IB message = “WIDTH-RANGE”
Local message = “Width: 10.0 ns to 150 ms”
5.26 Troubleshooting