HP Integrity BL870c User's & Service Guide

Table 29 EFI Commands (continued)
DefinitionBCH Command Parameters
(PA-RISC)
BCH Command
Equivalent
(PA-RISC)
EFI Shell Command
Display core LAN station addressLanAddresslanaddress
Display memory informationMemoryinfo mem
Display processor informationPRocessorinfo cpu
SERvice
Clear (zero) the contents of PIMCLEARPIMerrdump clear
Read memory locations scope of page
deallocation
<addr> [<len>] [<type>]MemReadmm
Display or clear the page deallocation
table
page deallocation
table (pdt)
pdt
Display PIM information[<proc>]
[HPMC|LPMC|TOC|ASIC]]
processor internal
memory (PIM)
errdump mca
errdump cmc
errdump init
errdump cpe
EFI/POSSE Commands
This section describes the EFI/POSSE commands developed for the server.
NOTE: EFI and POSSE are similar. EFI is an Intel specification; POSSE is the HP implementation
that aids HP support.
help
Provides information on the EFI Shell commands. It also has an additional feature to aid those
familiar with the BCH menus to adjust to their equivalent functions in EFI.
Syntax
help [-b] <category>
help [-b] <cmd>
help [-b] bch <bchmenu> <bchcmd>
Parameters
-b Enable page breaking
category Category of commands to view help on commands
cmd Shell command name on which to provide verbose information
bch Display the list of BCH commands and their corresponding EFI
bchmenu BCH menu name taken from the top level of the BCH menu
bchcmd BCH command on which to display information
Operation
If help is invoked with no parameters, a list of shell command categories displays. To list all of the
commands within a category, enter help <category> (see examples). If invoked with the -b
switch, any output longer than one page pauses after each page displays. If a shell command
name is used as a parameter, verbose help displays for that command.
If help is invoked with the bch option, it displays a list of BCH commands and their corresponding
EFI/POSSE commands. It instructs the user to repeat the command line followed by a menu name
for more information on that menu. If help is invoked followed by bch and a menu name, it
displays a list of commands that appear under that BCH menu. The user may then invoke help
followed by bch, the menu name, and a BCH command name to display information on that
command. This points the user to the command that has taken the place of that BCH functionality,
EFI/POSSE Commands 149

HP Integrity BL870c Specifications

General

Brand	HP
Model	Integrity BL870c
Category	Server
Language	English