EasyManuals Logo

HP Integrity BL870c User's & Service Guide

HP Integrity BL870c
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
• Reset Configuration to Default lets you restore server settings to their original configuration
• Help displays additional information about the available options
• Exit returns to the EFI startup menu
Security/Password Menu
You can set administrator and user passwords to provide different levels of access to the system
firmware.
Resetting Passwords
If you forget your passwords, they can be reset using an iLO 2 MP command.
• Run the MP BP command to reset the iLO 2 MP and reset the password.
NOTE: You can only run this command when directly connected to the server blade.
Integrated Lights Out 2 Management Processor
The iLO 2 MP is an independent support system for the server. It provides a way for you to connect
to a server and perform administration or monitoring tasks for the server hardware.
The iLO 2 MP controls power, reset, Transfer of Control (ToC) capabilities, provides console access,
displays and records system events, and displays detailed information about the various internal
subsystems. The iLO 2 MP also provides a virtual front panel used to monitor server status and the
state of front panel LEDs. All iLO 2 MP functions are available through the LAN and the local
RS-232 port.
The iLO 2 MP is available whenever the server is connected to a power source, even if the server
main power switch is off.
Access to the iLO 2 MP can be restricted by user accounts. User accounts are password protected
and provide a specific level of access to the server and iLO 2 MP commands.
Multiple users can interact with the iLO 2 MP. From the MP Main Menu, users can select any of
the following options: enter iLO 2 MP command mode, enter console, view event logs, view console
history, display virtual front panel, enter console session, or connect to another iLO 2 MP. Multiple
users can select different options from the MP Main Menu at the same time. However, iLO 2 MP
command mode and console mode are mirrored, The iLO 2 MP allows only one user at a time to
have write access to the shared console. For more information regarding the iLO 2 MP, see the
HP Integrity iLO 2 Operations Guide.
174 Utilities

Table of Contents

Other manuals for HP Integrity BL870c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Integrity BL870c and is the answer not in the manual?

HP Integrity BL870c Specifications

General IconGeneral
BrandHP
ModelIntegrity BL870c
CategoryServer
LanguageEnglish

Related product manuals