• bcfg boot mv #a #b – Move the item number specified by #a to the position
specified by #b in the boot options list.
• bcfg boot add # file.efi "Description" – Add a new boot option to the
position in the boot options list specified by #. The new boot option references file.efi
and is listed with the title specified by Description.
For example, bcfg boot add 1 \EFI\HPUX\HPUX.EFI "HP-UX 11i" adds an
HP-UX 11i item as the first entry in the boot options list.
See the help bcfg command.
4. Exit the console and iLO 2 for Integrity interfaces if you are finished using them.
Press Ctrl-B to exit the system console and return to the MP Main Menu. To exit the MP, enter
X at the Main Menu.
HP-UX Standard Boot
Use either of the following procedures to boot HP-UX:
• “Booting HP-UX (EFI Boot Manager)”; or
• “Booting HP-UX (EFI Shell)”
Booting HP-UX (EFI Boot Manager)
From the EFI Boot Manager menu, choose an item from the boot options list to boot HP-UX.
1. Access the EFI Boot Manager menu for the server on which you want to boot HP-UX.
Log in to iLO 2 MP and enter CO to choose the system console.
Confirm that you are at the EFI Boot Manager menu (the main EFI menu) when accessing the
console. If you are at another EFI menu, choose Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
2. At the EFI Boot Manager menu, choose an item from the boot options list.
Each item in the boot options list references a specific boot device and provides a specific set
of boot options or arguments you use when booting the device.
3. Press Enter to initiate booting using the chosen boot option.
4. Exit the console and iLO 2 MP interfaces when finished using them.
Press Ctrl-B to exit the system console and return to the MP Main Menu. To exit the MP Main
Menu, enter X at the MP Main Menu.
Booting HP-UX (EFI Shell)
From the EFI Shell environment, boot HP-UX on a device by first accessing the EFI System Partition
(for example fs0:) for the root device, then entering HPUX to initiate the loader.
1. Access the EFI Shell environment for the server on which you want to boot HP-UX.
Log in to the iLO 2 for Integrity and enter CO to choose the system console.
Confirm that you are at the EFI Boot Manager menu (the main EFI menu) when accessing the
console. If you are at another EFI menu, choose Exit from the submenus until you return to the
screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, choose EFI Shell to access the EFI Shell environment.
The EFI Shell displays all the files systems and block devices available.
2. At the EFI Shell environment, issue the map command to list all currently mapped bootable
devices.
The bootable file systems of interest typically are listed as fs0:, fs1:, and so on.
74 Booting and Shutting Down the Operating System
To Next Page
Loading...
Need help?
General