EasyManuals Logo

HP Integrity BL870c User's & Service Guide

HP Integrity BL870c
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
PCI Device, and PCI Function to the Bus #, Dev #, and Fnc # values from the
info io command.
CAUTION: Do not change the value for any of these fields on the Adapter Properties screen:
• Auto Termination
• Parity
• Bus Scan Order
• Spinup Delay (Secs)
Changing any of these fields can cause unpredictable results.
CAUTION: Do not change the value for any of these fields on the Device Properties screen:
• Scan Id
• Scan LUNs > 0
• Disconnect
• Timeout
• Queue Tags
• Format
• Verify
Changing any of these fields can cause unpredictable results.
7. Display (and optionally change) any parameters listed below for the channel of the interface,
or restore its parameters to their default values.
• ID
• Maximum data transfer rate
• Bus width
• Whether the interface is bootable (driver support)
• Avoid bus resets (secondary cluster server)
• Restore Defaults
8. Use the arrow keys to navigate to the appropriate parameter.
9. Use the plus (+) and minus (-) keys to scroll through the values until the value you want displays.
10. Press Esc to exit the Adapter Properties screen. You are given these choices:
• Cancel the exit from the screen (to stay in the Adapter Properties screen for the channel
of the interface)
• Save the changes you made and then exit the screen
• Discard the changes you made and then exit the screen
11. Move the cursor to the action (cancel, save, or discard) you want to take; press Enter.
If you selected cancel, you remain in the Adapter Properties screen for the channel of the
interface. You can still change the channel’s parameters listed above.
If you selected save or discard, you go to the EFI Setup Utility’s main menu.
CAUTION: Do not select <Global Properties> on the main menu.
12. Press Esc to exit the main menu and the EFI Setup Utility.
13. Select the option for exiting the utility.
14. When prompted, press Enter to stop the interface; you are at the EFI Shell prompt.
15. At the EFI Shell prompt, enter the reset command:
The server starts to reboot. This is required to cause the new setting.
168 Utilities

Table of Contents

Other manuals for HP Integrity BL870c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Integrity BL870c and is the answer not in the manual?

HP Integrity BL870c Specifications

General IconGeneral
BrandHP
ModelIntegrity BL870c
CategoryServer
LanguageEnglish

Related product manuals