Figure 21 Mezzanine Port Locations on the System Board
1
Mezzanine port 1: PCIe x4 port
2
Mezzanine port 2: PCIe x8 port
3
Mezzanine port 3: PCIe x8 port
The install order for the mezzanine ports is:
1. PCIe x4 card – Install into slot 1
2. PCIe x8 card – Install into slot 2
3. PCIe x8 card – Install into slot 3
If you are only installing PCIe x8 cards, start from mezzanine slot 2, not slot 1.
Mezzanine port 1 is lower than mezzanine ports 2 and 3 to enable the cards to be stacked on
top of each other. Figure 22 shows the mezzanine port heights.
38 Installing the Server Blade Into the Enclosure
To Next Page
Loading...
Need help?
General