Table 2-7 Pre-boot menu options (7 of 7) (continued)
Menu option First level Second level Third level Description
System Triage Copy Logs If the device will not boot to the Ready state, or the
diagnostic log feature found in the Troubleshooting
menu is not accessible, then use the System Triage item
to copy the diagnostic logs to a USB ash drive at the
next printer start up.
The les can then be sent to HP to help diagnose the
problem.
Change Svc PWD Use this item to change the Service menu personal
identication number (PIN).
Reset Svc PWD If the Service menu personal identication number (PIN)
has been changed. Use this item to reset it to the
original PIN.
Service Tools Reset Password Use this item to reset the Pre-boot administrator
password.
Subsystems For manufacturing use only. Do not change these values.
Developer Tools Netexec
96 Chapter 2 Solve problems ENWW
To Next Page
Loading...