Table 2-85 Service menu
First level Second level Third-level Value Description
Event Log Print Print or view the event log.
Clear Use this item to clear the
printer event log.
Cycle Counts
NOTE: The cycle count
range is 0 to 9999999.
Total Engine Cycles Set the page count that was
stored in NVRAM prior to
installing a new formatter.
Mono Cycle Count Use this item to record the
number of mono print jobs.
Refurbish Cycle Count Use this item to record the
page count when the printer
was refurbished.
Document Feeder Kit
Count (MFP only)
Total number of pages since
the document feeder kit was
replaced.
Document Feeder Kit
Interval (MFP only)
Use this item to set the
interval that causes the
printer to prompt the
customer to replace
document feeder
maintenance kit.
Clean Rollers Count (MFP
only)
Total number of pages since
the document feeder rollers
were cleaned.
Clean Rollers Interval
(MFP only)
Use this item to set the
interval that causes the
printer to prompt the
customer to clean the
document feeder rollers and
separation pad.
ADF Count (MFP only) Set the total pages fed
through the document
feeder.
Flatbed Count (MFP only) Set the total pages scanned
from the atbed.
ADF Simplex Count (MFP
only)
Set the total single-sided
pages fed through the
document feeder.
ADF Duplex Count (MFP
only)
Set the total two-sided
pages fed through the
document feeder.
Copy Scan Count (MFP
only)
Set the total copy pages that
have been scanned.
Send Scan Count (MFP
only)
Set the number of scanned
pages sent to email.
Fax Scan Count (fax
models only)
Set the number of scanned
pages that have been faxed.
ENWW Service mode functions 367
To Next Page
Loading...