DescriptionError
The physical formatter Read Chain Controller DS0 is stuck.4C0Ch
The physical formatter Read Chain Controller DS1 is stuck.4C0Dh
Physical formatter WP update.4C0Eh
Format other than LTO1 or LTO2.4C0Fh
SDRAM error has been detected.4C10h
The number of CCPs presented has fallen below the warning threshold.4C11h
A CCP has been overwritten.4C12h
A C2 error has been reported.4C13h
General physical formatter information.4C14h
Unexpected format complete signal arrived.4C15h
Check CCQ Write Rewrite log: param 1 = CCQSetsWritten, param2 = CCQSetRewrites,
param 3 = pfStatus.
4C16h
Physical pipeline control (from 5000h)
DescriptionError
EOD not found.5000h
Black tape.5001h
EOD encountered.5002h
Undefined error.5003h
The start LPOS of the dataset is before the LPOS of the previous dataset.5004h
The start LPOS is more than 1 metre after the previous dataset.5005h
Invalid configuration has been requested.5008h
Abort reject continue not used.5009h
Search in progress.501Eh
Mechanism command time-out; the control command never responded.501Fh
Command not allowed in this variant.5020h
Invalid tape type.5080h
The Error Rate Test has been aborted.5081h
PF reported a write error (excessive RWWs).5083h
PF reported a read error (C2).5084h
Volume 1: hardware integration 111
To Next Page
Loading...
