HP LTO Ultrium User Manual

DescriptionError
Failure during socket write.9C08h
MgmtArm rejected the maConfigNetworkIF options.9C09h
Requested self-test passed.9C0Ah
Requested self-test failed.9C0Bh
Fatal condition caused the Management ARM to fail.9C0Ch
Could not queue the message, the Mailbox is full.9C0Dh
Could not allocate memory to copy an ADT frame.9C0Eh
The awaited event has occurred.9C0Fh
The Mailbox is empty.9C10h
The command failed because the requested port does not exist.9C11h
Failed to connect to the remote host.9C12h
POST status not available.9C13h
Unable to get a new task object.9C14h
Cannot execute the SCSI command because another is in progress.9C15h
The KMS Agent Port interface received more SCSI data than permited within a burst.9C16h
PKI type invalid.9C17h
PKI format invalid.9C18h
PKI conversion error.9C19h
PKI processing error.9C1Ah
Servo (from A000h)
DescriptionError
No error.A000h
The servo system has shutdown due to panic conditions.A001h
The Servo Task fault buffer has overflowed. Some entries have been lost.A002h
The Servo Interrupt fault buffer has overflowed. Some entries have been lost.A003h
The servo firmware requested a timer when none was available.A005h
Timeout occurred while waiting to report servo statistics.A006h
The current servo firmware task is not a valid task.A007h
Drive error codes146

HP LTO Ultrium Specifications

General

Category	Tape Drive
Capacity (Compressed)	Up to 30 TB (LTO-8), Up to 45 TB (LTO-9)
Transfer Rate (Compressed)	Up to 900 MB/s (LTO-8), Up to 1000 MB/s (LTO-9)
Interface	SAS, Fibre Channel
Technology	Linear Tape-Open (LTO)
WORM Support	Yes
Encryption Support	Yes (AES 256-bit)
Partitioning Support	Yes
Capacity (Native)	Up to 12 TB (LTO-8), Up to 18 TB (LTO-9)
Transfer Rate (Native)	Up to 360 MB/s (LTO-8), Up to 400 MB/s (LTO-9)
Backward Read Compatibility	Yes (LTO-8 reads LTO-7, LTO-6; LTO-9 reads LTO-8, LTO-7)
Backward Write Compatibility	Yes (LTO-8 writes to LTO-7; LTO-9 writes to LTO-8)