HP LTO Ultrium User Manual

DescriptionError
A cartridge is not loaded but it has been detected in the drive.94C0h
An Automation Device Attribute Descriptor header was truncated.94C1h
The Automation Device Attribute value was truncated.94C2h
The AER Control deescriptor was truncated.94C3h
The status indicates that the specified symbolic name is the same as the current symbolic
name.
94C4h
The SET ADVANCED PORT SETTINGS parameter list was truncated.94C5h
The specified symbolic name exceeds the maximum permitted length.94C6h
The specified symbolic name is not null-terminated.94C7h
The specified Live Trace point has been specified multiple times in the parameter list.94C8h
The specified Live Trace point ID is invalid. It must be 0000h.94C9h
The firmware file sent is too big.94CAh
Automation/Drive Interface (from 9800h)
DescriptionError
Resource issue: The ADI failed to queue an object because the queue is full.9801h
The ADI failed to get a queue item because the queue was empty.9802h
Resource issue: The ADI was unable to allocate a new Frame Control Block.9803h
Resource issue: The ADI does not have sufficient memory to complete the current operation.9804h
Firmware defect: An invalid queue was referenced.9805h
Resource issue: Unable to allocate a new exchange ID; all Exchange IDs are in use.9806h
Firmware defect: The firmware generated an invalid state-machine event.9807h
Firmware defect: The firmware referenced an invalid firmware state-machine.9808h
Firmware defect: The firmware referenced an invalid FCB handle.9809h
Unable to get a new task object.980Ah
The SCSI Exchange ID table is full.980Bh
A new exchange has been started with an ID of an existing exchange.980Ch
The ADT Port interface received a SCSI Command IU containing an invalid field.980Dh
The ADT Port interface received a SCSI Data IU containing an invalid field.980Eh
The ADT Port interface received a SCSI Response IU containing an invalid field.980Fh
Volume 1: hardware integration 143

HP LTO Ultrium Specifications

General

Category	Tape Drive
Capacity (Compressed)	Up to 30 TB (LTO-8), Up to 45 TB (LTO-9)
Transfer Rate (Compressed)	Up to 900 MB/s (LTO-8), Up to 1000 MB/s (LTO-9)
Interface	SAS, Fibre Channel
Technology	Linear Tape-Open (LTO)
WORM Support	Yes
Encryption Support	Yes (AES 256-bit)
Partitioning Support	Yes
Capacity (Native)	Up to 12 TB (LTO-8), Up to 18 TB (LTO-9)
Transfer Rate (Native)	Up to 360 MB/s (LTO-8), Up to 400 MB/s (LTO-9)
Backward Read Compatibility	Yes (LTO-8 reads LTO-7, LTO-6; LTO-9 reads LTO-8, LTO-7)
Backward Write Compatibility	Yes (LTO-8 writes to LTO-7; LTO-9 writes to LTO-8)