DescriptionError
The command set cannot be changed while it is being read.848Ch
The data structure that contains status has an illegal value.848Dh
The specified snapshot LogSize is too small.848Eh
Infrastructure section (from 8800h)
DescriptionError
Inf OnEvent: EventSet – the event list is full, so the event has not been set.8800h
Inf OnEvent: the event has not been found in the list.8801h
Inf OnEvent: EventGetIdx – the index is out of bounds.8802h
Inf ARM exception vector taken: undefined instruction.8803h
Inf ARM exception vector taken: software interrupt.8804h
Inf ARM exception vector taken: prefetch abort.8805h
Inf ARM exception vector taken: data abort.8806h
Inf ECC event: recoverable ECC error detected.8807h
Inf ECC event: unrecoverable ECC error detected.8808h
Inf Boot failure: firmware image failed to boot.8809h
The ACI_RST_L input on the ACI connector has been activated.880Ah
Inf ECC event: Recoverable ITCM ECC error detected.880Bh
Inf ECC event: Recoverable DTCM ECC error detected.880Ch
Inf the System ARM is about to enter DiagLite.880Dh
Inf the True Random Number Generator's init routine failed at the start.880Eh
Inf the True Random Number Generator's BIST never completed.880Fh
Inf the True Random Number Generator's BIST SIG never became non-zero.8810h
Inf the True Random Number Generator has failed to re-seed.8811h
Inf the True Random Number Generator has failed to fill its cache.8812h
Volume 1: hardware integration 135
To Next Page
Loading...
