DescriptionCode
Supplied parameters out of bounds for this Buffer ID.187Fh
Drive control (from 1C00h)
DescriptionCode
Bad cartridge type. Attempted to load a cartridge of a type that drive control cannot
handle.
1C00h
Attempted to unload a cartridge when Prevent Medium Removal is on.1C01h
There is no firmware image available for upgrade.1C02h
Firmware image is incomplete.1C03h
Firmware image has checksum or other errors.1C04h
Firmware image is not compatible with the drive configuration.1C05h
Firmware image is too big to upgrade from.1C06h
Internal error in the Drive Control firmware upgrade code.1C07h
A firmware upgrade cartridge was in the drive when it powered on.1C08h
A load without threading has been requested for a cartridge with unusable Cartridge
Memory.
1C09h
Tried to load a writable cartridge with an unusable Cartridge Memory.1C0Ah
The write-protect tab setting was changed during a load.1C0Bh
A non-HP cleaning cartridge has been inserted in the drive.1C0Ch
Cannot determine the manufacturer of the cleaning cartridge.1C0Dh
No DRAM space reserved to hold the firmware image.1C0Eh
A cleaning cartridge was in the drive when it powered on.1C0Fh
Drive Control did an eject during the power-on sequence.1C10h
A firmware upgrade cartridge has been loaded when a data cartridge was expected.1C11h
A firmware upgrade cartridge was expected but some other type of cartridge has been
inserted.
1C12h
Failure due to drive temperature being out of acceptable range.1C13h
Cleaning cartridge initialized by a non-HP drive.1C14h
Trying to convert a non-data cartridge into a firmware upgrade cartridge.1C15h
Operation failed because cartridge is not present or not ready.1C16h
Cleaning cartridge loaded when a data cartridge was expected.1C17h
Volume 1: hardware integration 87
To Next Page
Loading...
