Rear panel components—full-height drives
Figure 1 Rear panel components for a full-height Fibre Channel drive
.
2. iADT Ethernet (10–pin)1. Diagnostic serial port (4–pin)
4. Port A optical connector (standard)3. External fan support (6–pin)
6. Automation and remote LEDs (16–pin)5. Port B optical connector (optional)
8. Port A LED7. AL_PA jumpers (may not be loaded)
10. Diagnostic serial port (4–pin)9. Port B LED
Position of pin 1 (which may be different from previous generation drives)
Rear panel and connectors32
To Next Page
Loading...
