DescriptionError
Error bit set.8011h
Type of transponder not recognized.8012h
RF channel already opened.8013h
RF channel already closed.8014h
EOT polled to.8015h
Fault log manager section (from 8400h)
DescriptionError
Log not yet implemented.8400h
No more entries to extract.8401h
Uninitialized NV logs.8402h
An SPIXferRequest failed.
8403h
Some fault entries were not placed in the log due to flushing occurring.8404h
The size of operation of an entry is different to what the logging system expects.8405h
A tape has been loaded and the fault log entry shows the load count and cartridge serial
number.
8406h
The requested operation cannot be performed at this time as a flush to NV is currently in
progress.
8407h
A snapshot change is not allowed because a snapshot is currently in progress.8480h
A request to read a snapshot log failed because the requested log number does not exist.8481h
Snapshotting is not allowed now as one or more preconditions have not been passed.8482h
A request to stop reading a log found the log was not being read in the first place.8483h
An attempt was made to insert too many CDBs for snapshotting.8484h
The end of the snapshot command set has been reached.8485h
An attempt was made to access the log snapshot command set while it is being updated.8486h
A snapshot command requested more SCSI data (out) than was available.8487h
The SCSI infrastructure requested a snapshot PortIF operation with an invalid/obsolete TaskPtr.8488h
The specified snapshot log is unavailable because it is being filled or created.8489h
The specified snapshot log is unavailable because it is being read.848Ah
The specified snapshot log is unavailable because its status is unexpected.848Bh
Drive error codes134
To Next Page
Loading...
