HP LTO Ultrium - Critical Section (from 8 C00 H); SCSI Module (from 9400 H)

Critical section (from 8C00h)
DescriptionError
End section not begun. CRSEndCritIntSect was ended without CRSBegIntSect.
8C00h
Begin section ints off. CRSBegCritIntSect found ints already off.
8C01h
SCSI module (from 9400h)
DescriptionError
Power-on reset Unit Attention.9401h
Firmware reboot after upgrade Unit Attention.9402h
SCSI bus reset Unit Attention.9403h
BDR reset Unit Attention.9404h
Soft reset Unit Attention.9405h
Transceivers changed to SE Unit Attention.9406h
Transceivers changed to LVD Unit Attention.9407h
Nexus lost Unit Attention.9408h
Media changed Unit Attention.9409h
Mode parameters changed Unit Attention.940Ah
Log values changed Unit Attention.940Bh
Unsupported task management function.940Ch
LUN has too many task objects.940Dh
Unsupported LUN.940Eh
Invalid field in CDB.940Fh
Unsupported opcode.9410h
Unsupported command handler request.9412h
Unavailable opcode.9413h
Not a fast ACI command.9414h
Response pending.9415h
Aborted.9416h
Reserved.9417h
Drive error codes136