HP MR Gen10 Plus User Manual

Using UEFI System UtilitiesUsing UEFI System Utilities
To use the System Utilities, use the following keys.
ActionAction KeyKey
Access System Utilities F9 during server POST
Navigate menus Up and Down arrows
Select items Enter
Save selections F10
Access Help for a highlighted configuration option F1
Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
Upon the first system power-up
After defaults have been restored
Default configuration settings are sufficient for typical server operations; however, you can modify configuration settings as needed.
The system prompts you for access to the UEFI System Utilities each time the system is powered up.
1
1
Using UEFI System Utilities 103

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable