HP MR Gen10 Plus User Manual

HPE MR Gen10 Plus ControllerHPE MR Gen10 Plus Controller
The HPE MR Gen10 Plus Controller is a family of tri-mode controllers ideal for maximizing performance while supporting advanced
RAID levels. This controller operates in Mixed Mode, which combines RAID and JBOD operations simultaneously.
This controller provides:
16 lanes across 2 x8 internal SlimSAS (SFF-8654) ports
16 Gbs NVMe, 12 Gbs SAS, 6 Gbs SATA
Mixed mode RAID and JBOD functionality simultaneously
UEFI and Legacy Boot modes
Support for Self-Encrypting Drive (SED)
Eight lane PCIe Gen4 host interface
Management tools:
MR Storage Administrator
IMPORTANT:IMPORTANT:
This controller is managed through the MR Storage Administrator. It cannot be managed using Smart Storage
Administrator or Intelligent Provisioning, or HPE OneView. MR controllers can be monitored by HPE OneView.
HPE StorCLI
UEFI Storage Configuration Utility
Redfish RESTful API
Figure 1: Figure 1: HPE MR Gen10 Plus ControllerHPE MR Gen10 Plus Controller naming framework naming framework
HPE MR Gen10 Plus Controller 7

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable