HP MR Gen10 Plus - Energy Pack Specifications

Energy pack specificationsEnergy pack specifications
Table 1: HPE Smart Storage Battery (96W)Table 1: HPE Smart Storage Battery (96W)
FeatureFeature DescriptionDescription
Time required to
recharge Smart Storage
Battery
96 W: 2 hours (For maximum load of 24 devices)
Duration of Smart
Storage Battery backup
150 seconds (maximum support)
The Smart Storage Battery provides a sufficient duration to transfer the cached data from DDR memory
to flash memory, where the data remains indefinitely or until a controller retrieves the data.
For more information, see QuickSpecsQuickSpecs for the Smart Storage Battery.
Table 2: HPE Smart Storage Battery (12W)Table 2: HPE Smart Storage Battery (12W)
FeatureFeature DescriptionDescription
Time required to
recharge Smart Storage
Battery
12 W: 1 hour (For maximum load of 2 devices.
Duration of Smart
Storage Battery backup
150 seconds (maximum support)
The Smart Storage Battery provides a sufficient duration to transfer the cached data from DDR memory
to flash memory, where the data remains indefinitely or until a controller retrieves the data.
For more information, see QuickSpecsQuickSpecs for the Smart Storage Battery.
Table 3: HPE Smart Storage Hybrid CapacitorTable 3: HPE Smart Storage Hybrid Capacitor
FeatureFeature DescriptionDescription
Time required to
recharge capacitor
pack
Not applicable; charge is immediate
Duration of capacitor
pack backup
60 seconds
The capacitor pack provides a sufficient duration to transfer the cached data from DDR memory to flash
memory, where the data remains indefinitely or until a controller retrieves the data.
The capacitor pack can be used in place of the 96 W Smart Storage Battery, but it is not supported on the Apollo servers.
For more information, see QuickSpecsQuickSpecs for the capacitor pack.
Energy pack specifications 166