HP MR Gen10 Plus User Manual

Selecting the right RAID type for your IT infrastructureSelecting the right RAID type for your IT infrastructure
The RAID setting that you select is based upon the following:
The fault tolerance required
The write performance required
The amount of usable capacity that you need
Selecting the right RAID type for your IT infrastructure 20

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable