HP MR Gen10 Plus User Manual

Thermal monitoringThermal monitoring
The controller monitors the temperature of each drive in the server. iLO periodically collects these drive temperatures from the
controller to control the fan speed. The fan speed is optimized so that each drive is maintained below its maximum continuous
operating temperature regardless of the workload.
This method has the benefit of saving cost by allowing the fans to run at an optimal setting while ensuring that drives do not overheat.
Thermal monitoring 75

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable