Initializing a driveInitializing a drive
NOTE:NOTE:
Initializing a drive will delete any data on the drive.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive that you want to initialize.
3. In the drive screen, select Initialize Drive from the Operation drop-down menu.
4. Click Go.
The Success screen appears to confirm that the operation is successful.
5. Review the warning message and click Confirm and Yes to proceed.
To Next Page
Loading...
