HP MR Gen10 Plus User Manual

Memory and storage capacity conventionsMemory and storage capacity conventions
Memory capacities are specified using binary prefixes:
KiB = 2 bytes
MiB = 2 bytes
GiB = 2 bytes
TiB = 2 bytes
Storage capacities are specified using SI prefixes:
KB = 10 bytes
MB = 10 bytes
GB = 10 bytes
TB = 10 bytes
Older, and other, documentation might use SI prefixes for binary values.
Actual available memory capacity and actual formatted storage capacity for devices are less than specified values.
10
20
30
40
3
6
9
12
Memory and storage capacity conventions 168

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable