HP MR Gen10 Plus - Changing the Legacy BIOS Boot Order

Changing the Legacy BIOS boot orderChanging the Legacy BIOS boot order
PrerequisitePrerequisite
Boot Mode is set to Legacy BIOS Mode .
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > Legacy BIOS
Boot Order and press Enter.
2. Use the arrow keys to navigate within the boot order list.
3. Press the + key to move an entry higher in the boot list.
4. Press the - key to move an entry lower in the list.
5. Press F10.
Changing the Legacy BIOS boot order 94