HP MR Gen10 Plus User Manual

Sanitizing an Unconfigured Good driveSanitizing an Unconfigured Good drive
Cryptographic erase is supported on SSDs, and some HDDs. To understand if your drive supports crypto erase, see QuickSpecsQuickSpecs.
WARNING:WARNING:
During a sanitize operation, any data on the drive is permanently lost.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Drive Management.
2. In the Drive Management screen, select the JBOD drive that you want to convert to Unconfigured Good.
3. In the drive screen, select Make Unconfigured Good from the Operation drop-down menu. Click Go, and follow the instructions on
the screen to proceed.
4. Click Advanced and check the Cryptographic Erase Capable field shows Yes to make sure you can perform cryptographic erase on
the drive.
5. In the drive screen, select Cryptographic Erase from the Operation drop-down menu. Click Go, and follow the instructions on the
screen to proceed.
Sanitizing an Unconfigured Good drive 154

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable