HP MR Gen10 Plus User Manual

Viewing controller information and performing common actionsViewing controller information and performing common actions
Use the Dashboard View screen to view the properties of the controller, view the server profile, and perform common actions.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+.
2. In the Dashboard View panel, click Main Menu to access the main menu.
3. Click Help to view the help content.
4. View the properties.
SettingSetting DefinitionDefinition
Status Status of the controller.
Backplane Number of backplanes connected to this controller.
Enclosure Number of enclosures connected to this controller.
Drives Number of drives connected to this controller.
Arrays Number of arrays on this controller.
Logical
Drives
Number of logical drives on this controller.
ROC
Temperature
(C)
The temperature of the ROC.
View Server
Profile
Shows the UEFI spec version that this system supports and menu options such as Controller Management,
hardware Components, Drive Management, and Logical Drive Management.
5. Perform the common actions, as needed:
Configure
Setting factory defaults
6. View any background operations in progress.
7. View the status of the advanced software options.
NOTE:NOTE:
In this version of the controller, all advanced software options are enabled.
8. Optional. Click Manage MegaRAID Advanced Software Options to view the list of activated advanced software options.
Viewing controller information and performing common actions 105

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable