HP MR Gen10 Plus User Manual

Locating a physical drive associated with a logical driveLocating a physical drive associated with a logical drive
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Logical Drive Management.
2. In the Logical Drive Management screen, select the logical drive.
3. In the Logical Drive screen, select Start Locate from the Operation drop-down menu.
4. Click Go.
The LEDs for the drive associated with the logical drive begin blinking.
To stop the LEDs from blinking, select Stop Locate from the Operation drop-down menu.
Locating a physical drive associated with a logical drive 141

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable