HP MR Gen10 Plus User Manual

Changing Drive Security settingsChanging Drive Security settings
When the Local Key Management (LKM) mode is set, change to security settings are applied immediately.
When External Key Management (EKM) mode is set, change to security settings are applied when you reboot the system.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Change Current Security Settings.
4. Change the required fields. You are allowed to change the Security Key Identifier , Security Key, and Password at Boot Time .
5. Click Save Security Settings.
Changing Drive Security settings 125

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable