HP MR Gen10 Plus User Manual

Table of contentsTable of contents
1 HPE MR Gen10 Plus Controller
1.1 200 series
1.2 400 series
2 Features
2.1 Controller supported features
2.1.1 Operating environments
2.1.2 RAID technologies
2.1.3 Transformation
2.1.4 Drive technology
2.1.5 Security
2.1.6 Reliability
2.1.7 IO performance mode
2.2 RAID technologies
2.2.1 Selecting the right RAID type for your IT infrastructure
2.2.1.1 Selecting RAID for fault tolerance
2.2.1.2 Selecting RAID for write performance
2.2.1.3 Selecting RAID for usable capacity
2.2.1.4 Selecting RAID for the storage solution
2.2.2 Mixed mode (RAID and JBOD)
2.2.3 Striping
2.2.3.1 RAID 0
2.2.4 Mirroring
2.2.4.1 RAID 1 and RAID 1+0 (RAID 10)
2.2.4.2 Read load balancing
2.2.5 Parity
2.2.5.1 RAID 5
2.2.5.2 RAID 50
2.2.5.3 RAID 6
2.2.5.4 RAID 60
2.2.5.5 Parity groups
2.2.5.6 Initialize
2.2.5.6.1 Fast initialization
2.2.5.6.2 Full initialization
2.2.5.6.3 No initialization
2.2.5.7 Regenerative writes
2.2.5.8 Backed-out writes
2.2.5.9 Full-stripe writes
2.2.6 Spare drives
2.2.6.1 Dedicated spare
2.2.6.2 Global spare
2.2.7 Drive rebuild
2.2.8 Foreign configuration import

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable