HP MR Gen10 Plus User Manual

Managing the controllerManaging the controller
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.
2. In the Controller Management screen, view the basic properties of the controller:
PropertyProperty DescriptionDescription
Product name The name of the controller.
Serial number Controller serial number.
Controller status Possible options are Optimal, Needs Attention, Failed, or Safe Mode.
Select Boot Device The selected primary bootable device.
PCI ID Manufacturer-assigned ID.
PCI Slot Number ID of the PCI Slot that contains the controller.
Active package version Active version of the controller package.
Backup package version Backup version of the controller package.
CPLD version CPLD version.
Connector count Number of host data ports/connectors on the controller.
Drive count Number of drives currently attached to this controller.
Logical drive count Number of logical drives on the controller.
3. Click Advanced Controller Management to perform advanced controller tasks.
For more information, see Advanced Controller Management .
4. Click Advanced Controller Properties to configure advanced controller settings.
Managing the controller 118

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable