HP MR Gen10 Plus - Selecting Drives to Include in a Logical Drive

Selecting drives to include in a logical driveSelecting drives to include in a logical drive
Use the steps in this topic to select the unconfigured drives that you want to include in the logical drive.
ProcedureProcedure
1. In the Select Drives screen, specify the type of drive by selecting an option from the Select Media Type drop-down menu.
Options include SAS, SATA, or NVMe.
2. Select the interface type from the Select Interface Type drop-down menu.
Options include SAS, SATA, or both.
3. Specify the sector size from the Logical Sector Size drop-down menu.
Options include 512 KB, 4 KB.
The unconfigured drives that match the criteria you specified are listed.
4. Select one of more unconfigured drives.
5. Click Apply Changes.
The Success screen appears to confirm that the selection was performed successfully.
6. Click OK.
The Create Logical Drive screen appears.
Selecting drives to include in a logical drive 109