HP MR Gen10 Plus User Manual

Saving a serial logSaving a serial log
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Save Serial Log.
4. In the Save Serial Log screen, select the file system for saving the serial log.
5. Select the directory for saving the log.
The current directory is the default directory.
6. Specify the filename for the log, using a .txt file extension.
7. Select the number of entries (in KB) to save in the log.
8. Click Save Log.
The Success screen appears to state that the operation is performed successfully.
Saving a serial log 122

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable