HP MR Gen10 Plus User Manual

Updating software and firmwareUpdating software and firmware
Server and controller firmware should be updated before using the controller for the first time. For system software and firmware
updates, download the SPP from the Hewlett Packard Enterprise website https://www.hpe.com/servers/spp/downloadhttps://www.hpe.com/servers/spp/download. For information
about the SPP, see the product documentation at the Hewlett Packard Enterprise websiteHewlett Packard Enterprise website .
Hewlett Packard Enterprise now distributes drivers and other support software for servers and server blades through Service Pack for
ProLiant, or SPP, which you can download from https://www.hpe.com/servers/spp/downloadhttps://www.hpe.com/servers/spp/download. Be sure to use the latest SPP version for
the server or server blade.
If you installed an OS by using the Intelligent Provisioning software, its Configure and Install feature may have provided the latest
driver support.
After you update MR Storage Administrator, clear the browser cache.
Updating software and firmware 157

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable