Scheduling a consistency checkScheduling a consistency check
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Schedule Consistency Check .
4. In the Schedule Consistency Check screen, select the frequency.
5. Assign the start date for the consistency check.
6. Assign the start time for the consistency check.
7. Select the consistency check mode. The options are:
Sequential - Checks the logical drives one at a time.
Concurrent - Checks all of the logical drives simultaneously.
8. Select the Start Immediately option to state the consistency check on all logical drives except any excluded drives.
9. Click Exclude Logical Drives to specify the logical drives to exclude from the consistency check.
10. Click Apply Changes.
The Success screen appears to confirm that the operation is performed successfully.
To Next Page
Loading...
