HP MR Gen10 Plus User Manual

HPEHPE Smart Storage Battery Smart Storage Battery
The HPE Smart Storage Battery supports the following devices:
HPE Smart Array SR controllers
HPE Smart Array MR controllers
After the battery is installed, it might take up to two hours to charge. Controller features requiring backup power are not re-enabled
until the battery is capable of supporting the backup power.
HPE Smart Storage Battery 164

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable