HP MR Gen10 Plus User Manual

4.2.6 Drive management
4.2.6.1 Viewing drive properties
4.2.6.2 Locating a drive
4.2.6.3 Initializing a drive
4.2.6.3.1 Placing a drive offline
4.2.6.4 Erasing a drive
4.2.6.5 Making a JBOD
4.2.6.6 Making an Unconfigured Good drive
4.2.6.7 Making a bootable drive
4.2.6.8 Assigning a global spare drive
4.2.6.9 Unassigning a global spare drive
4.2.6.10 Sanitizing an Unconfigured Good drive
5 Maintenance
5.1 System maintenance tools
5.1.1 Updating software and firmware
5.1.2 Diagnostic tools
5.1.2.1 Troubleshooting resources
6 Models
6.1 HPE MR Gen10 Plus Controller
7 Energy pack options
7.1 HPE Smart Storage Battery
7.2 HPE Smart Storage Hybrid Capacitor
7.3 Energy pack specifications
8 Specifications
8.1 Memory and storage capacity conventions
8.2 RAID conventions
8.3 Controller specifications
9 Websites
10 Support and other resources
10.1 Accessing Hewlett Packard Enterprise Support
10.2 Accessing updates
10.3 Remote support
10.4 Customer self repair
10.5 Warranty information
10.6 Regulatory information
10.7 Documentation feedback

HP MR Gen10 Plus Specifications

General

Device Type	RAID Controller
Interface	PCIe 3.0 x8
RAID Support	Yes
Category	Controller
RAID Levels	0, 1, 5, 6, 10, 50, 60
Memory	2GB Flash-backed cache
Storage	SAS/SATA
Power Supply	Not Applicable