HP OmniBook 900 Evaluation Guide

Using the OmniBook Docking Solutions
Operating the Docking Solutions
7-4
To undock the OmniBook
1. If you’re using Windows NT, click Start, Shut Down.
2. Press the undock button on the front of the dock and wait for the
undock light to turn green. Then position your thumb as shown and
pull the release lever forward.
3. Remove the OmniBook from the dock.
To manually undock the OmniBook
If you cannot undock the OmniBook using the undock button (for
example, you have no ac power or battery power), you can manually
undock the OmniBook. Manual undocking overrides password protection.
1. Save your work and turn off your OmniBook. If you are using
Windows 95, be sure to use the shut down option from the Start menu.
2. If you are using a Kensington MicroSaver lock to secure your dock,
remove the lock.
3. Pull out and hold the manual release tab on the right rear corner of the
dock while pulling the release lever toward the front to eject the
OmniBook.

HP OmniBook 900 Specifications

General

Brand	HP
Model	OmniBook 900
Category	Laptop
Language	English