Using Windows 98
Installing Retail Windows 98
4-5
6. When prompted, select Other Directory and click Next.
7. Enter C:\WINDOWS for the path, click Next.
8. Click Yes to continue with the specified directory.
9. Choose Portable on the Setup Options screen, then click Next.
10. Enter the appropriate User Information, then click Next.
11. If prompted, enter identification information and click Next.
12. Select Install The Most Common Components (recommended), then
click Next.
13. Select your country or region and click Next.
14. Click Next to create a Windows 98 Startup Disk.
15. Click Cancel to skip creating the startup disk.
16. Click Next to start Copying Windows 98 Files to Your Computer.
17. When prompted with the PC Card Wizard click Next, Next, then
Finish.
18. If prompted, press OK and then enter your computer and workgroup
names and click Close.
19. Enter any changes when the system displays the Time Zone screen.
The Windows 98 Setup Wizard will now configure the Control Panel,
programs on the start Menu, Windows help, and MS-DOS program
settings. Afterwards, Windows will automatically reboot.
20. After Windows 98 reboots, enter a Windows Password and confirm.
21. Hardware detection will occur. Upon completion, reboot the machine.
To install video support for retail Windows 98
If you’ve installed a retail version of Windows 98, you’ll need to install
video support. The driver is located on the Recovery CD in
\OMNIBOOK\DRIVERS\WIN98\VIDEO. On the OmniBook 900 B
Recovery CD: \OMNIBOOK\DRIVERS\W98\VIDEO.
1. Insert the Recovery CD.
2. From Control Panel, double-click Display, then click Settings.
3. Click Advanced, then Adapter.
4. Click Change.
5. Click Next at the Update Device Driver Wizard.
6. Select Display a list of all the drivers in a specific location, so you can
select the driver you want and click Next.
7. Click Have Disk.
8. Enter the directory of the video drivers on the Recovery CD, then click
OK.
To Next Page
Loading...
Need help?
General