Using Windows 98
Installing Intel® SpeedStep( Technology Applet
4-15
Installing Intel
®
SpeedStep
Technology Applet
If you've installed a retail version of Windows 98, you'll need to install the
Intel
®
SpeedStep
technology Applet if you have a dual-speed Pentium III
processor.
This section describes how to
♦ Install the Intel SpeedStep Technology Applet.
To install the Intel SpeedStep Technology Applet
The Intel SpeedStep files are located on the hard drive under:
\OMNIBOOK\DRIVER\SPEEDSTP
and on the Recovery CD under:
\OMNIBOOK\DRIVER\SPEEDSTP
1. Open Windows Explorer.
2. Double-click SETUP.EXE in the SpeedStep directory.
3. When prompted, click NEXT.
4. Click FINISH to reboot the OmniBook.
To Next Page
Loading...
Need help?
General