Using Windows NT 4.0
Installing Retail Windows NT 4.0
6-6
To install Service Pack 5 for retail Windows NT 4.0
If you’ve installed a retail version of Windows NT 4.0, you’ll need to
install Service Pack 5. This is located on OmniBook 900 B Windows NT
Recovery CD in the root directory \NT4_SP5 or the Microsoft website at
http://www.microsoft.com/support/winnt/
1. Connect the CD-ROM drive, if necessary, and insert the OmniBook
900 B Recovery CD into the CD-ROM drive.
2. From the Start menu, click Run.
3. From the CD-ROM drive, run \NT4_SP5\SP5I386.EXE. (If you
downloaded SP5 from Microsoft’s web site, run it from its current
location.)
4. Select Accept the Software License Agreement.
5. Unselect Backup files necessary to uninstall this Service Pack at a later
time.
6. When prompted, click Restart to reboot.
To install video support for retail Windows NT 4.0
(OmniBook 900 B)
If you’ve installed a retail version of Windows NT 4.0, you'll need to
install video support. The driver is located on the OmniBook 900 B
Windows NT Recovery CD in \OMNIBOOK\DRIVERS\NT4\VIDEO.
1. From the Start menu, click Run.
2. From the Recovery CD run
\OMNIBOOK\DRIVERS\NT4\VIDEO\SETUP.EXE.
3. Click Next at the Welcome screen.
4. Click Yes to accept the Software License Agreement.
5. Click Finish to restart the computer.
6. When Windows NT restarts, it displays a message that a new graphics
driver has been installed. When you see this message, click OK.
7. Set the Resolution to 800 x 600, the Color Palette to 65536 colors, the
Refresh Frequency to your needs, click Test, then click OK.
8. If the graphic is correctly displayed, click Yes, otherwise click No and
change the setting.
9. Click OK.
To Next Page
Loading...
Need help?
General