Using Windows 98
Installing Retail Windows 98
4-7
To install audio support for retail Windows 98, First Edition
(OmniBook 900)
If you’ve installed a retail version of Windows 98, you’ll need to install
audio support. This driver is located on the OmniBook’s hard drive or on
the Recovery CD in \OMNIBOOK\DRIVERS\WIN98\AUDIO\DISK1.
1. From Control Panel, double-click System, then click Device Manager.
2. Double-click the PCI Multimedia Audio Device under Other Devices.
3. Click Driver, then click Update Driver.
4. Click Next to search for driver.
5. Select Display a list of all the drivers in a specific location, so you can
select the driver you want and click Next.
6. Click Next.
7. Click Have Disk.
8. Enter the directory of the audio drivers
(\OMNIBOOK\DRIVERS\WIN98\AUDIO\DISK1) and click OK.
9. Click Next to accept the NeoMagic MagicMedia 256AV Audio.
10. Click Next.
11. Click Finish.
12. Click Close.
13. Double-click the Unknown device under Other devices.
14. Click on the Driver tab, then click Update Driver.
15. Click Next.
16. Select Display a list of all the drivers in a specific location, so you can
select the driver you want and click Next.
17. Click Next.
18. Click Have Disk.
19. Enter the directory of the audio drivers
(\OMNIBOOK\DRIVERS\WIN98\AUDIO\DISK1) and click OK.
20. Click Next to accept NeoMagic MagicWave 3DX Sound System.
21. Click Next.
22. When prompted for the second disk, click OK and specify the
\OMNIBOOK\DRIVERS\WIN98\AUDIO\DISK2 directory on the
Recovery CD.
23. Click Finish.
24. Click OK to close the Unknown Device Properties window.
25. Close the System Properties Window.
26. Shut down and restart Windows 98.
To Next Page
Loading...
Need help?
General