Using the OmniBook Docking Solutions
Using the Docking Solutions under Windows 95/98
7-7
To configure a docked hardware profile
When Windows 95 installs a new Dock device (such as a network card), it
may include the device in both the docked and undocked configurations.
To prevent problems when undocking, remove the device from the
undocked configuration. You will also need to remove the SCSI controller
from the undocked configuration. This problem has been improved in
Windows 95B OEM Service Release 2.5, but may still occur.
1. Double-click My Computer, Control Panel, System.
2. Click the Device Manager tab and find the device you installed.
3. Select the card, then click Remove.
4. When the Confirm Device Removal box appears, select Remove From
Specific Configuration.
5. If the Remove From Specific Configuration is not an option, then
Windows 95 has configured the card correctly. Choose Cancel.
-or-
Under Configuration, select Undocked, then choose OK.
Note
Do not remove devices such as the keyboard, mouse, or display from any
configuration.
Refer to your Microsoft Windows 95 documentation for more information
about configuring hardware profiles and installing drivers.
To Next Page
Loading...
Need help?
General