HP OmniBook 900 Evaluation Guide

Using Windows 95
Installing Windows 95
5-7
3. Click Change.
4. Click Have Disk.
5. Enter the directory of the video drivers on the Recovery CD, then click
OK.
6. If you are using the OmniBook 900 B, select RAGE MOBILITY AGP,
otherwise, choose the NeoMagic MagicMedia 256AV video driver and
click OK.
7. Under Monitor, click Change.
8. Choose the Laptop Display Panel (1024x768), then click OK.
9. Click Close, then set the Color Palette to True Color [24 bit] and the
Desktop Area to 1024 by 768 pixels. Click Close again. Click Yes to
restart the computer.
To install audio support for Windows 95
If you’ve installed Windows 95, you’ll need to install audio support. This
driver is located on the Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\AUDIO\DISK1. It is located on the
OmniBook 900 B Recovery CD in
\OMNIBOOK\DRIVERS\W95\AUDIO.
1. From Control Panel, double-click System, then click Device Manager.
2. Remove the PCI Multimedia Audio Device under Other Devices. Click
OK in the Confirm Device Removal dialog box.
3. Click on the Refresh button to redetect the Multimedia Audio Device.
4. Click Next in the Update Device Driver Wizard.
5. Click Other Locations.
6. Enter the directory of the audio drivers under location and click OK.
7. Click Finish.
8. If prompted for the Audio Driver disk, click OK then enter the
directory of the audio drivers and click OK. If prompted for the second
disk, click OK and specify the ..\DISK2 directory on the Recovery CD.
9. From the Start Menu, click Run.
10. Enter D:\OMNIBOOK\DRIVERS\WIN95\NETSHOW\MPFULL (on
the OmniBook 900 B enter
D:\OMNIBOOK\DRIVERS\W95\NETSHOW\MPFULL) and click
OK.
11. Click Yes to install the Windows Media Player.
12. Click Yes to accept the license agreement.
13. Select the connection rate you normally use and click OK.
14. Click OK to confirm successful installation.

HP OmniBook 900 Specifications

General

Brand	HP
Model	OmniBook 900
Category	Laptop
Language	English