HP OmniBook 900 Evaluation Guide

Operating the OmniBook
Configuring the OmniBook with the BIOS Setup Utility
2-6
Power Button Mode Sets the action of the blue power button when pressed for less
than 4 seconds.
Suspend
Lid Switch Mode Sets the action when the OmniBook lid closes. Turn off LCD
Resume on Serial Ring Sets whether the system resumes from Suspend if a ring signal
is received.
Enabled
Resume on Time of Day Sets whether the system resumes from Suspend at a defined
time of day.
Disabled
Resume Time Sets the 24-hour time when the system resumes from Suspend
if enabled.
Auto Suspend on Undock* Sets whether the OmniBook suspends after undocking. When Lid
Closed
Auto Turn-on on Dock* Sets whether the OmniBook turns on after docking. Enabled
* For Windows 2000, only these settings are used. All other settings in this menu are ignored.
Boot Menu
Setting Description Default
+Removable Device
+Hard Disk
CD-ROM/DVD Drive
Shows the order of boot devices. Move the entries to change
the order. If the computer has more than one device in one of
the “+”categories, you can select the one that’s scanned.
1. Removable
Device
2. Hard Disk
3. CD-
ROM/DVD drive

HP OmniBook 900 Specifications

General

Brand	HP
Model	OmniBook 900
Category	Laptop
Language	English