Using Windows 95
Installing Windows 95
5-8
15. Click Cancel for the Internet Connection Wizard, then click Yes to
confirm.
16. Restart the computer.
Note
If you do not install the latest version of the Windows Media Player by
running MPFULL.EXE. You may have a Suspend problem when playing
an audio or video file.
To Install PC Card support for Windows 95
If you’ve installed Windows 95, you’ll need to install PC Card support.
This driver is located on the OmniBook’s hard drive or on the Recovery
CD in \OMNIBOOK\DRIVERS\WIN95\PCCARD. It is located on the
OmniBook 900 B Recovery CD in
\OMNIBOOK\DRIVERS\W95\PCCARD.
1. Copy all files from the ..\PCCARD\950CONLY on the Recovery CD
to C:\WINDOWS\OPTIONS\CABS.
2. Copy the PCMCIA.INF file from the ..\PCCARD\950CONLY on the
Recovery CD to C:\WINDOWS\INF.
3. Click Yes to overwrite any files.
4. From Control Panel, open System, then Device Manager.
5. Remove both PCI CardBus Bridge devices under Other Devices. Click
OK in the Confirm Device Removal dialog box each time.
6. Click on the Refresh button to redetect the Texas Instruments PCI TI-
1225 Cardbus Controller.
7. Click Yes to restart Windows 95.
8. From Control Panel, double-click PC Card (PCMCIA).
9. The PC Card (PCMCIA) Wizard starts, click Next.
10. Click Next.
11. Click Finish.
12. Click Yes to shut down and turn off the OmniBook.
To install infrared support for Windows 95
If you’ve installed Windows 95 and you wish to use infrared, you’ll need
to install infrared support. These drivers are located on the OmniBook’s
hard drive or on the Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\IRDA and in
\OMNIBOOK\DRIVERS\WIN95\FASTIR. They are located on the
To Next Page
Loading...
Need help?
General