Using Windows 98
Installing Retail Windows 98
4-6
9. If you are using the OmniBook 900 B, select RAGE MOBILITY AGP,
otherwise, choose the NeoMagic MagicMedia 256AV video driver and
click OK.
10. Click Next to accept the driver location.
11. Click Finish.
12. Under Monitor, click Change.
13. Choose Laptop Display Panel (800 x 600) and click OK.
14. Click Close, and then Close again. Click Yes to restart the computer.
15. After reboot, re-enter the Display Properties window and click
Settings.
16. Set the appropriate Desktop Area and Color Palette to 800 x 600, True
Color [24 bit] or High Color [16 bit].
17. Click OK in Display Properties.
18. If prompted, restart the computer with the new color settings and
Click OK.
19. Click Yes to Restart the computer.
To install audio support for retail Windows 98
(OmniBook 900 B)
If you’ve installed a retail version of Windows 98, you’ll need to install
audio support. This driver is located on the OmniBook’s hard drive or on
the OmniBook 900 B Recovery CD in
\OMNIBOOK\DRIVERS\W98\AUDIO.
1. From the audio drivers directory in the recovery CD run Setup.exe.
2. Click Next at the Welcome screen.
3. Click Next, choosing to Upgrade Drivers.
4. Click Finish to restart the Computer.
Note
If you are installing Windows 98, First Edition, please install the latest
version of the Windows Media Player in
OMNIBOOK\DRIVERS\W98\1ST_EDN.W98\NETSHOW\ by running
MPFULL.EXE. This will prevent an issue if you suspend when playing an
audio or video file.
To Next Page
Loading...
Need help?
General