Using Windows 95
Installing Cards
5-19
4. Click Finish to install the driver.
5. Even though the 3Com driver disk is still in the A: drive, Windows
will prompt you to insert the driver disk. Click OK.
6. Type A:\ when the path dialog box appears, then click OK.
7. If asked for the path to the Windows 95 cab files, enter the path
C:\WINDOWS\OPTIONS\CABS. Press Enter.
8. From Control Panel, double-click Network, then click Identification.
9. Enter your computer name, workgroup and description.
10. If necessary, click the Configuration tab and add new protocols.
11. Click OK to close the Network Properties window.
12. Click Yes to restart the OmniBook.
Your 3Com 3C575 Fast EtherLink XL CardBus PC Card is now ready
for use.
To Next Page
Loading...
Need help?
General