Smart Array 113
4-4-10 HP_DeviceIndication: Controller Redundancy state
has been set to Active
Table 4-104 HP_DeviceIndication: Controller Redundancy state has been set to Active
Property name Property implementation
AlertType 5 (Device Alert)
EventTime Time of the event or time of the indication if event time
unknown
ProviderName HP Smart Array
RecommendedActions Check status of all controllers. An array controller may
have failed causing this controller to become active.
SystemCreationClassname CreationClassName of the computer system generating
the indication
HP_AlertIndication
Summary Controller redundancy state set to Active
EventCategory 6 (Primary Storage)
ProbableCause 1 (Other)
ProbableCauseDescription Array Controller Redundancy State Changed to Active
NetworkAddresses Contains a list of all the IP addresses of the computer
system generating the indication
OSType SMX_OperatingSystem.OSType
OSVersion The operating system version of the computer system
generating the indication in the following format:
<major>.<minor>.<build>
ProviderVersion 2.2.0.0
SystemFirmwareVersion Firmware version of the computer system generating
the indication
SystemSerialNumber Serial number of the computer system generating the
indication
SystemProductID Product ID of the computer system generating the
indication
SystemModel Model name of the computer system generating the
indication
SystemGUID Platform GUID of the computer system generating the
indication
To Next Page
Loading...
Need help?
General