HP ProLiant BL280c - G6 Server Datasheet

System Temperature Sensor 320
Table 11-2 Class: SMX_NumericSensor
Property name
Property implementation
PossibleStates Array can contain any of the following values:
PossibleStates[0] = Normal
PossibleStates[1] = Critical
CIM_NumericSensor
CurrentReading Current reading of temperature sensor
BaseUnits 2 (Degrees C)
RateUnits 0 (None)
UnitModifier 0
SupportedThresholds SupportedThresholds[0] = 1
(UpperThresholdNotCritical) if the system will set fans
to full speed if the threshold is crossed
SupportedThresholds[0] = 3 (UpperThresholdCritical)
set if the system will gracefully attempt to shutdown the
system if the threshold is crossed
SupportedThresholds[0] = 5 (UpperThresholdFatal) if
the system will immediately power down the system if
the threshold is crossed
SettableThresholds <empty>
UpperThresholdNonCritical Contains the threshold temperature that
CurrentReading must exceed to be in a non-critical
state. This is only set if the system will set fans to full
speed if the threshold is crossed.
UpperThresholdCritical Contains the threshold temperature that
CurrentReading must exceed to be in a critical state.
This is only set if the system will gracefully attempt to
shutdown the system if the threshold is crossed.
UpperThresholdFatal Contains the threshold temperature that
CurrentReading must exceed to be fatal. This is only set
if the system will immediately power down the system if
the threshold is crossed.
HP_NumericSensor
NumericSensorType
Enumeration describing the type of temperature sensor.
See MOF.
12-2-3 SMX_SensorCollection
SMX_SensorCollection implements HP_SensorCollection and is used to model temperature sensor
collections on Servers. There is one instance of this class on systems modeling sensors.
Table 11-3
Class: SMX_SensorCollection
Property name Property implementation
CIM_ManagedElement

HP ProLiant BL280c - G6 Server Specifications

General

Brand	HP
Model	ProLiant BL280c - G6 Server
Category	Software
Language	English